Cyberpunk Skull

Is it scary or is it cute?

When you get too much chrome installed living in Night City, you might just end up looking like this Choom on Halloween someday.

Staring at it you can almost feel something...ominous, like an echo of a life from 100 years in the future.

Wonder what that right eye implant was forced to scan 24/7 on that display...

Start small and scale up! Would love to see how big or how small you can get it to print and what paint scheme you come up with!

No stand required, balances on its own.

*Printed in Silver PLA

Printed on Elegoo Neptune 3 in silk silver PLA with following settings:

Layer height: .2mm
Nozzle: 220°C
Infill Density: 15%
Print Speed: 70mm/s
Initial Layer Speed: 10mm/s
Infill: Gyroid
Wall Thickness: 2mm
Top/Bottom Thickness: 2mm
Supports: Tree
Support angle: 40°
Adhesion: Skirt

*Optional settings
Draft Shield: Enabled
Shield distance: 10mm
Shield height: limited to 10mm

Adjust settings to your printer and friendly reminder to fine tune your z-settings even after leveling for best results.

Happy printing!